industrial repair agent > BD626 wet surface special epoxy compound repairing agent

BD626 wet surface special epoxy compound repairing agent

Wet surface protection special epoxy compound repairing agent

Product description:
It’s the Two-component repairing material consist of modified resin and Phenol amine underwater curing agent.
Mainly used in the emergency repair processing of various leakage,leakage working condition.

Performance features of BD626 wet surface protective special repair agent epoxy compound:
1.Construction is convenient,can construct with water
2.With a higher bonding strength to various metal and inorganic material
3.Fast curing,leakage stoppage is about 30 minutes.

Performance index of BD626 epoxy resin compound coating repairing agent
for wet surface wear abrasion protection:

product name	physical state	standard packaging	volume (cm3)	operation time limit (25℃)	usable time (25℃)	range of application
BD626 wet surface repairing agent epoxy compound	paste	500g/set Two-component	327	30min	12h	Repairing construction is in damp environment, even the water,used in emergency repairing and building leaking stoppage of pipeline,valves, tank in the damp environment or underwater working.

Main physical mechanical properties:

Item model	color	density (g/cm3)	compressive strength (Mpa) GB1041-2008	shear strength (Mpa) GB7124-2008	bending strength (Mpa) GB1042-1999	hardness after curing （Shore D） ASTM-D-2556	working temperature （℃）
BD626	brownish red	1.53	91	27	57	96	-60～150

How to use:
Should follow the process principle of stopping leakage first and repairing last
1.Surface treatment: Do the coarsening treatment around the parts of the temporarily stopping leakage,then clean it.

2.Configuration: According to the mass ratio A:B=6:1 or volume ratio A:B=3.5:1,make A and B two components mix uniformly,
and use it up within 30 minutes(operation time limit)

3.Coating: Make the mixed-up material spread coating on the leakage area or around it,other strengthening measures
should be taken if necessary.

4.Curing: Initial curing is for 30 minutes at the temperature of 25 degree,it can be used 50 minutes later,
fully curing is for 12 hours,when the temperature is below 15 degree,should prolong the curing time or
take heating measures for curing.

Packaging specification:
Two-component,500g/set,16 sets/carton.

Transportation storage:
Sealed storage in the cool and dry place.The warranty period is 24 months.Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD626 wet surface protective use repair putty two parts paste epoxy compound coating:

------分隔线----------------------------